In The Classroom

• In the Classroom: Restoring the Westernfield Model 36 Rifle, Part 10
• Restoring the Westernfield Model 36 Rifle, Part 9: Removing Old Finish
• Restoring the Westernfield Model 36 Rifle, Part 8: Applying The Finish Coat
• In The Classroom: Restoring the Westernfield Model 36 Rifle, Part 7: Staining
• Restoring the Westernfield Model 36 Rifle, Part 6: Bleaching the Stock
• In the Classroom: Restoring the Westernfield Model 36 Rifle, Part 5: Removing Dents
• Restoring the Westernfield Model 36 Rifle, Part 4: Sanding the Stock
• Restoring the Westernfield Model 36 Rifle, Part 2: Cleaning the Stock
• Restoring the Westernfield Model 36 Rifle, Part 3: Stock Repair
• Restoring the Westernfield Model 36 Rifle - Part 1
• Jack; Teslong Rigid Rod Bore Scope/Understanding and Evaluating Rifle Bores
• John Bush: Improvising Firing Pins
• John Bush; Extractorless Guns
• Gene Shuey on Muzzle Brakes and Compensators
• John Bush-Firing Pins/Safeties, “Hammer Down” Carry
• Shepherd Dual Reticle Scopes
• John Bush Teaches the Madsen Machinegun
• Ken & Bob on Springs Part II
• Ken & Bob on Springs
• Jack Discusses Shotgun Bore and Choke Sizes and How to Measure Them
• Screwdrivers
• Remington 700 Blow-up
• Extractors That Don’t “Obey the Rules”
• Tools of the working commercial gunsmith
• Gene Shuey talks about Vises
• Winchester Model 70 Blow-up, “Bob’s Closet” – Russian DPM Auto-Rifle
• Russian/Swedish Nagant Revolver
• Simple, accurate, and SAFE method of doing “sear in hammer notch” Trigger jobs
• Carcano Carbine Blow-up
• Rhino Revolver Design/Function
• Headspace; Part 4 Head Separation
• Headspace/Loose Breech, the Difference
• Nickel Plating – Pro’s & Con’s
• Barrel Making with John Krieger
• Selecting Stock Blanks, with James Tucker
• Metallurgy
• Adjusting Point of Impact with Fixed Sight Handguns
• Headspace; Part 3, Testing Commercial Ammo to Head Separation
• Headspacing Savage 10-116 Bolt Action Rifles
• Bullet Stability and “Yaw”
• Savage AccuTrigger
• Field Demonstration of Headspace
• Fit Loose Revolver Grips
• Bonus! Mk III & 22/45 Add-on to Ruger Standard Auto Armorer’s Course
• Loose Breech
• Solving Problems on Unfamiliar Guns
• Firing Pins, Part 3 Rimfires
• Firing Pins, Part 2 Specifications
• Firing Pins, Part 1
• Headspace, Part 2 How to Test for It
• Headspace, Part 1 What is it, How is it Measured
• Extractors, Part 11 Extractor Position
• Extractors, Part 10 Extractor Fit, Three Different Systems
• Extractors, Part 9 The Left-Hand Extractor
• Extractors, Part 8 Shaping & Contouring the Hook
• Extractors, Part 7
• Extractors, Part 6 Slide Under/Snap Over Extractors
• Extractors, Part 5 Moment of Mass
• Extractors, Part 4 Moment of Mass
• Extractors, Part 3 Extractor Function, Semi Auto vs Manual Operation
• Extractors, Part 2 Do Extractors Always Have to Extract? Straight Blow-backs
• Extractors, Part 1